Water Main Condition Assessment from Above Ground: Replace It, or Run It for Another 20 Years?

Water utilities keep asking us the same question about their old mains: replace the pipe, or keep it in service for another 20 years? Getting that answer right has already saved pipeline operators many millions on unnecessary replacement. Until now it was often an estimate based on age, material and burst history. With Current Magnetometry Inspection (CMI), EMPIT delivers a water main condition assessment from the surface. No excavation, no shutdown, no tool inside the pipe.

Why Water Main Inspection Is Hard

Most water mains were never built for inline inspection, which makes water pipeline inspection difficult. Grey cast iron and ductile iron lines have bends, valves, branches and changing diameters. Many have no coating and no cathodic protection. Taking a transmission main out of service is rarely an option, and in older networks the exact route of the pipe is not always known.

Grey cast iron pipe Ductile iron pipe Steel pipe

How CMI Inspects Water Pipelines

We feed a small alternating current into the pipe and measure the magnetic field it creates, from the surface and along the full length of the line. The main stays in operation the whole time.

EMPIT Current Mapper measuring above a buried water main

What the Condition Assessment Delivers

For every main, whether grey cast iron, ductile iron or steel, coated or uncoated:

Corrosion

  • Corrosion assessment for uncoated mains: every detected location is classified into a corrosion rate class with a corrosion rate in µm per year, assessed for whether a surface layer has formed, and given a recommended action
  • Coating integrity assessment and corrosion assessment for coated mains: every coating defect is located, classified by its corrosion rate in µm per year, ranked by priority and given a recommended action
  • Soil resistivity profile: continuous along the route and georeferenced, showing the sections where the soil promotes corrosion
  • For steel mains with cathodic protection, in addition: AC corrosion risk assessment and stray current influence on third-party structures

Position and geometry

  • 2D pipeline scan: seamless location of the main with its absolute position and horizontal bends, so every finding can be found again on site
  • 3D pipeline scan: depth of cover along the whole line, with a pipe, ground level and cover profile
  • Advanced 3D pipeline scan: bends from 2°, radii, and pipe movement when the inspection is repeated
  • Bending strain assessment: for welded steel mains
  • Detection of crossing cables: frequency-carrying underground cables that cross the main

All results of the pipe condition assessment come as a report and in the EMPIT Pathfinder web app, on a map, location by location. Where a location needs a closer look, an optional stationary follow-up measurement (PermaScan) gives the local corrosion rate directly.

Excavation in a street exposing the main for verification Corrosion on the exposed main

Where Water Utilities Use CMI

Water utilities across Europe rely on CMI, among them operators in Germany, Switzerland, the United Kingdom and France, and so do utilities in the United States. The lines range from grey cast iron well collector mains to bitumen-coated steel transmission mains. EMPIT has mapped more than 1,000 km of cast iron and ductile iron pipelines in 3D.

With the CMI assessment, pipeline operators have already saved many millions on unnecessary replacement. They rehabilitated only the spots that needed it, left mains in the ground that were up for replacement only because of their installation age, or moved sections into rehabilitation earlier. This finally solves the asset management problem that there is too little money for the rehabilitation strategy: targeted measures that save millions.

Talk to Us

Planning a renewal programme, or unsure about one critical main? Tell us the length, material and location of the line, and we will tell you whether CMI fits.

Read more

01. September 2026

The First CMI-Guided ROV: Inspecting Unpiggable Pipelines Underwater

Read more

09. November 2026

Last Night EMPIT won Germany's Gas Industry Innovation Award.

Read more

Back