
NEW: Onshore Inspections
The Flux
A robust handheld system for corrosion detection and 3D mapping of unpiggable pipelines.
Discover the Flux
NEW: Onshore Inspections
A robust handheld system for corrosion detection and 3D mapping of unpiggable pipelines.
Discover the Flux
NEW Service
Know how fast every coating defect corrodes, in µm/year, validated against excavations.
See how it works
FREE: Whitepaper
How CMI separates protected steel from actively corroding steel, without excavation.
Download
In-Line Inspection (ILI) uses instrumented devices — commonly known as pigs — that travel through the pipeline interior to measure wall condition. ILI tools typically rely on Magnetic Flux Leakage (MFL) or ultrasonic sensors to detect metal loss, cracks, and geometric anomalies from inside the pipe wall.
ILI is widely used in transmission pipelines that have pig launcher and receiver stations, consistent diameters, and predictable flow conditions. When these requirements are met, ILI delivers detailed internal wall data and is a well-established method in pipeline integrity management programs worldwide.
However, a significant portion of the global pipeline network cannot accommodate inline tools. Pipelines with tight bends, diameter changes, unbarred tees, or missing launcher stations are classified as unpiggable — and for these lines, ILI is simply not an option.
EMPIT’s patented Current Magnetometry Inspection (CMI) takes a fundamentally different approach. Instead of entering the pipeline, CMI applies a multi-frequency electrical current (2 Hz – 2 kHz) to the pipeline and measures the electromagnetic response from the surface — without excavation and without service interruption.
Through patented spectrum analysis, CMI distinguishes between active corrosion and coating defects — where bare steel is in direct soil contact and a corrosion cell is electrically active — and passivated corrosion, where a calcareous or oxide film has formed and the corrosion process has stopped. This distinction is critical: only active defects require excavation and repair, while passivated defects need only monitoring.
CMI is deployed via EMPIT’s carrier systems — the Current Mapper (handheld onshore), Yellowfin (offshore vessel), and Black Copter (drone) — equipped with up to 70 tri-axial sensors recording 20,000 data points per second. Defects are GPS-georeferenced with a precision better than 1 mm².
CMI and ILI are not interchangeable — they differ in methodology, access requirements, and the type of information they deliver.
Important: CMI does not measure corrosion depth or wall thickness. The two technologies answer different questions — ILI asks “how much metal has been lost?”, while CMI asks “is corrosion actively progressing?”
The choice between CMI and ILI depends on pipeline accessibility, the information required, and the integrity management strategy in place.
EMPIT’s CMI technology aligns with ISO 15589-1 and is ECDA-ready, making it suitable for integration into existing pipeline integrity management systems alongside non-invasive pipeline inspection services.
Whether your pipeline is piggable, unpiggable, or somewhere in between — our team can help you determine the right inspection approach. Contact us to discuss your specific requirements.