
NEW: Onshore Inspections
The Flux
A robust handheld system for corrosion detection and 3D mapping of unpiggable pipelines.
Discover the Flux
NEW: Onshore Inspections
A robust handheld system for corrosion detection and 3D mapping of unpiggable pipelines.
Discover the Flux
NEW Service
Know how fast every coating defect corrodes, in µm/year, validated against excavations.
See how it works
FREE: Whitepaper
How CMI separates protected steel from actively corroding steel, without excavation.
Download
Airport jet fuel pipelines operate under demanding conditions. They run beneath taxiways, aprons, and terminal buildings — often encased in concrete or buried alongside complex electrical networks. Ensuring their integrity is critical to both operational safety and environmental protection.
At a well-known Swiss airport, the fuel pipeline network could not be inspected with conventional In-Line Inspection (ILI) tools. Sharp bends, diameter changes, and horizontal pits classified these lines as unpiggable pipelines — ruling out pig-based or crawler-based methods entirely.
EMPIT's Current Magnetometry Inspection (CMI) provided a non-invasive alternative. CMI applies a multi-frequency electrical current (2 Hz – 2 kHz) to the pipeline and measures the electromagnetic response from the surface — without excavation and without interrupting fuel supply operations.
Using the portable Current Mapper system, EMPIT's inspection team surveyed the pipeline network from above ground. The tool's tri-axial sensors recorded data at up to 20,000 points per second, enabling the team to map pipeline condition even where lines were encased in concrete or ran through areas with significant electrical interference. This aboveground pipeline inspection approach required no physical access to the pipeline interior.
Through patented spectrum analysis, CMI identified sections where active corrosion and coating defects were present — meaning bare steel was in direct soil contact and a corrosion cell was electrically active. The technology also distinguished these from passivated corrosion, where a protective film had formed and the corrosion process had stopped.
This classification allowed the airport operator to focus excavation and repair efforts exclusively on actively corroding sections, while passivated defects were flagged for monitoring only. All defect locations were GPS-georeferenced with a precision better than 1 mm².
Airport pipeline networks present conditions that conventional inspection methods cannot address effectively. CMI offers distinct advantages in this environment:
EMPIT's CMI technology aligns with ISO 15589-1 and is ECDA-ready, supporting integration into existing pipeline integrity management programs.
Whether your pipelines run beneath airports, industrial facilities, or urban infrastructure — EMPIT's CMI technology can assess their condition without excavation or downtime. Contact us to discuss your specific requirements.